Fuel and Injection

$130.00$4,000.00

Part Number: N/A Category:

WORKING ON THIS (Under Construction)

Injectors - Custom sizes available as well as 1st Gen Cummins sets (call for more info)

All of our injectors are built with new components, no cores, SAC nozzles (VCO Available), higher pop pressures, clean idle, easier starting and crisper power.

 

12 Valve P7100 5 hole injectors

5x12's are great for slightly modded trucks up to around 500HP

5x14's are a very nice all around size for decent power up to 600HP with great characteristics. modest towing can be done with good tuning.

5x16's are starting the slippery slope of power making. still a very streetable size. towing can be done with compounds. HP potential around 800HP

5x18's are the largest injectors we recommend to street. these are big enough that AFC adjustment become hard to notice. these will smoke under load. HP potential up to 1000HP.

 

7 hole 24 Valve VP44 injectors

7x10's are great for slightly modded trucks up to around 500HP

7x11's are a very nice all around size for decent power up to 600HP with great characteristics. modest towing can be done with good tuning.

7x12's are starting the slippery slope of power making. still a very streetable size. towing can be done with compounds. HP potential around 700HP on fuel

7x14's are the largest injectors we recommend to street. These will smoke. your VP build need to be pretty spicy to run these well. 800+HP.

 

P7100 pump can be custom build, tons of potential configurations (please call for 13 and 14mm builds) Auto Governors unless specified and discussed.

12mm, NEW, from 350-700CC's.

13mm, NEW 903 cam, DLC coated Elements, CC flow from 600-1000, HP goals of up to 1200HP, semi streetable

14mm- NEW 903 cam, DLC coated Elements, CC flow from 800-1400, all out drag racing and sled pulling, HP goals over 1200.

 

.093 Holders- We recommend these holders on all builds over 600cc's. stock to .093 lines

.120 Holders- Recommend for large builds over 900HP, .093 lines and larger.

 

.024 Delivery Valves- My personal favorited valve. Nice clean, crisp improvement without being filthy.

191 Delivery Valves- flows slightly more than the .024's. Great all around valve.

8mm Comp Valves- big Gurls, recommended for fun trucks and go fast things.

 

We also can get you setup with service work on you VE and P7100 pumps if your needing a rebuild.

(Call for Details)

 

 

 

Additional information

Injectors | Injection Pumps | Deliver Valve Holders | Delivery Valves |

12v 5×12"s, 12v 5×14's, 12v 5×16's, 12v 5×18's, 24v 7×10's, 24v 7×11's, 24v 7×12's, 24v 7×14's, 12mm P7100, 13mm P7100, 14mm P7100, .093, .120, .024's, 191's, 8mm Comp's, 4k Governor springs